Product Description

1.Compatible with all the fire fighting panel

2.Release button and STOP button

3.Two buttons are protected by glass cove

Manual Release Station  compatible with all the fire fighting panel. Widely used for Building, Home, Apartment etc

Release button and STOP button

Two buttons are protected by glass cover

Easy installation

Emergency start or stop button is used to control gas fire extinguishing system start-up and stopping . Usually installed in the field ,when the fire broke out inside the protected area ,press the “ press spray ” button on the emergency start and stop button ,you can send a request signal to the gas sprayed gas fire controller ( hereinafter referred to as the controller ) . Gas fire gas spray controller sends commands by the delay ,start spraying gas solenoid valve. During the delay ,if the site staff confirmed that no fire occurs,immediately press the "Stop" button to terminate the start.

Payment Terms︰ T/T,WU,PAYPAL